FIBERTHREE
F3 / 03

Materials

By engineers for engineers: our polyamide filaments combine strength, media resistance and dimensional accuracy with the capabilities of current printers. Developed in Darmstadt, produced in Germany.

F3 PA-CF Pro filament spool with vacuum bag and packaging
ITEM 01 · FILAMENTS13
ITEM 02 · DIAMETER1.75 / 2.85 mm
ITEM 03 · DATA SHEETSDE / EN
ITEM 04 · ORIGINMade in Germany
01Material comparison

All filaments at a glance

Properties of printed test specimens according to the technical data sheet. Filter by base or property.
BASE
PROPERTY
ProductBaseFeatureDensity g/cm³Tensile modulus MPaTensile strength 0° MPaHDT °C
F3 PA-CF ProPA615 % Carbonfaser1.2510,500110120Pro
F3 PA-GF ProPA615 % Glasfaser1.275,5609090Pro
F3 PA-GF30 ProPA630 % Glasfaser1.358,07010690Pro
F3 PA Pure ProPA6unfilled1.203,4008090Pro
F3 PA ESDPA6Carbon fibre + conductive particles1.2012,200105120Pro
F3 PA OrthoPA6unfilled, translucent1.202,52249–Pro
F3 PA-CF LitePA1215 % Carbonfaser1.2410,0009090Lite
F3 PA Pure LitePA12unfilled1.143,3008090Lite
F3 PP GF25PP25 % Glasfaser1.092,44225–Other
F3 PC CF 150PC15 % Carbonfaser1.257,54569130Other
F3 TPU 80ATPUShore 80A1.09286–Other
F3 TPU HSETPUShore 92–95A, safety colours1.1685––Other
F3 TPU 98ATPUShore 98A1.233911–Other

13 of 13 filaments · Values of printed test specimens (x-y 0°) according to the technical data sheet · “–” means: not stated in the data sheet

02Pro family · PA6

Maximum strength

Six PA6-based polyamides, from unfilled to 30 % glass fibre, plus ESD-safe and biocompatible grades.
03Lite family · PA12

Low water, high toughness

Two polyamides on a PA12 base for parts that must stay dimensionally stable in humid environments.
Filament spool F3 PA-CF Lite, SeitenansichtF3 PA-CF Lite15 % CarbonfaserFilament spool F3 PA Pure Lite, SeitenansichtF3 PA Pure Liteunfilled
Pro or Lite?
PRO · PA6Higher strength, easier to print, more sensitive to moisture during printing. LITE · PA12Very low water absorption, needs considerably more heat in the hotend.
04Other materials

PC, PP and TPU

For applications beyond polyamides: polycarbonate with carbon fibre, glass-filled polypropylene and flexible TPU.
05Processing

Four rules for good prints

What applies to all Fiberthree technical filaments. The exact parameters are on each product page.
01Keep it dry

Store and print polyamides dry, otherwise surface quality and strength suffer.

02Hardened nozzle

Fibre-reinforced filaments are abrasive. A wear-resistant nozzle is a must.

03Wide radii

Filled filaments are stiff. Avoid tight bend radii in the tube and feed.

04Strong adhesion

Our polyamides adhere very well. A suitable build plate makes removal easier.

06Where to buy

Two ways to our material

APrint it yourself

Buy filaments from our dealers in six countries.

BHave it printed

We produce your part from our material. You will receive your quote within 24 h.