| Property | Test direction | Unit | Value |
|---|---|---|---|
| MECHANICAL | |||
| Density | – | g/cm³ | 1.25 |
| Tensile modulus | x-y 0° | MPa | 10,500 |
| Tensile modulus | x-y 90° | MPa | 4,700 |
| Tensile strength | x-y 0° | MPa | 110 |
| Tensile strength | x-y ±45° | MPa | 85 |
| Tensile strength | x-y 90° | MPa | 70 |
| Stress at break | x-y 0° | MPa | 112.73 |
| Elongation at break | x-y 0° | % | 0.98 |
| Flexural modulus | x-y ±45° | GPa | 4.78 |
| Impact strength (Charpy, ISO 179eU) | – | kJ/m² | 47 |
| Notched impact strength (Charpy, ISO 179eB) | – | kJ/m² | 5.46 |
| THERMAL | |||
| Glass transition temperature | – | °C | 68 |
| Heat deflection temperature (HDT A, 1.8 MPa) | – | °C | 120 |
Technical polyamide filament, modified for 3D printing, with an additional carbon fibre filler. The carbon fibres minimise shrinkage, so warping is largely reduced.
The material shows enormous strength while retaining impact strength, very low tendency to warp and very good layer adhesion. Thanks to its good heat and media resistance, it is suitable for all applications requiring high-strength parts. Attractive surface with a matt sheen.
Compared with F3 PA-CF Lite: higher strength and easier printing, but more sensitive to moisture during printing. Thin-walled parts can become flexible in humid conditions. In that case F3 PA-CF Lite is the better choice.