FIBERTHREE
F3 / 02 DIN EN ISO 9001:2015

Contract manufacturing

We manufacture your parts using FFF up to approx. 1000 mm in size, preferably from our own high-performance polyamides. You will receive your quote within 24 h.

Close-up in the printer: black FFF part with columns and a slope, supported by a fine support structure on the build plate
FIG. 01Part with support structure on the build plate, close-up from production.
01Services

What we make for you

From the first functional prototype to the spare part that is no longer available anywhere else.
ItemApplicationTypical partsTypical materials
01PrototypesFunctional prototypes, housings, parts for assembly and fit testingF3 PA Pure Pro · F3 PA-CF Pro · PETG
02Small batches & seriesHousings, holders, covers, cable guidesF3 PA-CF Pro · F3 PA-GF Pro · F3 PA Pure Lite
03Jigs and fixturesGrippers, gauges, assembly and inspection fixturesF3 PA-CF Pro · F3 PA-GF30 Pro · F3 PA ESD
04Spare partsParts no longer available, reproduced from drawings or CADF3 PA-CF Lite · F3 PP GF25 · ASA
  • Prototypes
  • Small batches & series
  • Jigs and fixtures
  • Spare parts
Industries · WHERE OUR MATERIALS PLAY TO THEIR STRENGTHS
B1Mechanical engineering

Grippers, gauges and assembly fixtures: stiff, light, resistant to media.

F3 PA-CF Pro
B2Electronics

Workpiece carriers and holders with ESD requirements, dissipative in the printed part.

F3 PA ESD
B3Medical technology

Orthoses and translucent housings. Passed biocompatibility testing to ISO 10993-5.

F3 PA Ortho
B4Process engineering

Parts in contact with acids and aggressive media, with no water absorption.

F3 PP GF25
B5High temperature

Parts that must withstand high temperatures and chemicals.

PPSUPEKK-A
Post-processingWhat happens after printing
Support removalIncluded with every part.
AnnealingIncreases crystallinity, e.g. for F3 PA ESD: a few hours at 70 °C.
OtherThreaded inserts, sanding, painting, metallising and individual dimensional inspection.
02Engineering & consulting

More than printing

We come from an engineering office. That is why we advise not only on the material but on the entire design.
CAD adaptation for FFF

We adapt your design to layer-by-layer construction, including support structures, orientation and fibre direction.

print-ready CAD you can keep using

Slicer settings

Suitable parameters for the slicer of your choice, matched to material, printer and equipment.

tested profile for your own printer

Training & coaching

For teams building additive manufacturing in-house: design, material selection, fibre reinforcement, post-processing.

your team designs and prints FFF-ready

03Designing for FFF

Orientation makes the difference

FFF parts are much stronger within the layer plane than across it. We orient each part to its load direction and get up to three times more part strength from the same material.
Tensile strength by print direction PRINTED TEST SPECIMENS · MPA · 0° = IN PRINT DIRECTION · 90° = ACROSS THE LAYERS
F3 PA-CF Pro · 15 % carbon fibre
0°
120 MPa
±45°
85 MPa
90°
40 MPa
F3 PA-GF Pro · 15 % glass fibre
0°
90 MPa
±45°
80 MPa
90°
40 MPa
F3 PA Pure Pro · unfilled
0°
80 MPa
±45°
80 MPa
90°
30 MPa
FIG. 02Source: Fiberthree technical data sheets. For F3 PA-CF Pro, strength in print direction is three times higher than across the layers.
Design guidelines
  1. 01Place the main load within the layer plane.
  2. 02Avoid flat overhangs or plan for support structures.
  3. 03Design wall thicknesses as whole-number multiples of the line width, at least two line widths.
  4. 04Allow for rework or inserts on fits and threads.
  5. 05Avoid sharp inside corners with fibre-reinforced materials.
04Process & quality

Documented to DIN EN ISO 9001:2015

Every order follows the same process. So at every step you know what we need from you and what you get from us.
StepYour partOur partResult
01 Anfrage
CAD data and requirementsFeasibility check and material selectionQuote within 24 h
02 Engineering
Approval of the proposed changesMaterial, orientation, FFF-ready designApproved production data
03 Fertigung
–Printing with approved parameters and dry-processed materialParts
04 Inspection
–Visual and dimensional inspection to the agreed inspection planInspected parts
05 Lieferung
Goods receiptPackaging and shippingParts with documentation of material and batch
SKZ seal: ISO 9001, certified management system
Certified quality management

Our quality management system is certified to DIN EN ISO 9001:2015. Scope according to the certificate: development and sale of filaments, production of additively manufactured plastic parts. Contract manufacturing is therefore explicitly included.

Certification body: SKZ - Cert GmbH Certificate no. 001106.Q Valid 21 JUL 2026 to 20 JUL 2029
Certificate (PDF, German) Certificate (PDF, English)
05Production capacity

From small parts up to 1 metre

Three build volume classes for every part size and enough capacity for single parts and series, at short notice and reliably planned.
300
CLASS 01 Compact

Up to approx. 300 mm. Prototypes, small parts and series with many parts in parallel.

500
CLASS 02 Industrial

Up to approx. 500 mm. Functional parts and fibre-reinforced high-performance parts.

1000
CLASS 03 Large format

Up to approx. 1000 mm. Large parts, fixtures and moulds in one piece.

MAX. PART SIZEUp to approx. 1000 mm
LAYER HEIGHT0.1 – 0.5 mm
TOLERANCESBy agreement
CAPACITYAvailable at short notice
06Material selection

Ideally with our own material

We know our own filaments from developing them and from daily use on our print farm, which is why we prefer to use them. Of course, we also manufacture parts from any other material, relying on proven materials from our network.
Recommended · Fiberthree· IF YOU NEED …
15 % carbon fibre on a PA6 base: tensile strength 110 MPa, tensile modulus 10,500 MPa, heat deflection temperature 120 °C.
07FAQ

Frequently asked questions

How quickly will I receive a quote?

Within 24 h of receiving your enquiry with CAD data.

What lead time can I expect?

That depends on the part, material and quantity. We state a binding delivery date in the quote.

Which file formats can I send?

STEP, STL and 3MF. STEP is best suited for design adaptations.

How do you determine part orientation?

By the main load direction: an FFF part is considerably stronger within the layer plane than across it. We agree the orientation with you in the engineering step.

Do you treat my data confidentially?

Yes. On request, we work under our standard NDA.

Is there a minimum order quantity?

No. We produce single parts as well as series and have sufficient capacity for both. For orders below €300 net we charge a small-quantity surcharge.

When is FFF the better choice than SLS?

FFF plays to its strengths with large parts up to approx. 1000 mm, fibre-reinforced polyamides and high-performance plastics such as PPSU and PEKK-A. SLS is suited to very delicate geometries without support structures. We advise which process suits your part.

08Enquiry

Request a quote

Upload your CAD data. We will get back to you within 24 h with feasibility, a material recommendation and a price.