FIBERTHREE
F3 TPU 80A filament spool (red), side view
01 / 03Side view
TPU Shore 80A flexible

F3 TPU 80A

Soft TPU with Shore hardness 80A, extremely elastic and impact-resistant, resistant to oils and solvents. For sealing, pressure and impact surfaces.

COLOUR · Red
  • 01Thermoplastic polyurethane (TPU), Shore 80A
  • 02Extreme elasticity
  • 03Extreme impact strength, moderate water absorption
  • 04High resistance to oil and solvents
  • 05Temperature-stable up to 100 °C
  • 06Excellent adhesion to the print bed, matt surface
01Properties

Measured on the printed part

Values according to the technical data sheet, measured on printed test specimens, just as you will use the material. “–” means: not stated in the data sheet.
PropertyTest directionUnitValue
MECHANICAL
Density–g/cm³1.09
Yield stress (ISO 527)–MPa32.68
Tensile modulusx-y 0°MPa28
Tensile strengthx-y 0°MPa6
Elongation at breakx-y 0°%< 250
Hardness (ISO 868)–Shore80 A · 37 D
Compression set (22 h, 70 °C)–%87
THERMAL
Heat resistance–°C100
ELECTRICAL & OTHER
Water absorption (24 h)–%> 0.2
Volume resistivity–Ω·m> 10¹²
Comparing the TPU filaments PER DATA SHEET
TENSILE MODULUS X-Y 0° · MPA
TPU 80A
28 MPa
TPU HSE
85 MPa
TPU 98A
39 MPa
HEAT RESISTANCE · °C
TPU 80A
100 °C
TPU HSE
100 °C
TPU 98A
120 °C
F3 TPU 80A is the softest of the three TPU filaments, ideal for seals and soft contact surfaces.
02Material & processing

Soft and elastic

Material properties

Thermoplastic polyurethane with a Shore hardness of 80A (37D). The material is extremely elastic and impact-resistant, absorbs moderate amounts of water and is highly resistant to oils and solvents.

Temperature-stable up to 100 °C. Recommended for elastic parts with high impact strength, such as sealing, pressure and impact surfaces. Matt surface.

Processing notes
  1. 01Leave the print bed cold.
  2. 02Print slowly: 30 mm/s.
  3. 03Printable with any nozzle. No abrasion-resistant nozzle is needed.
Print parameters
NOZZLE220–240 °C
PRINT BEDcold
MINIMUM NOZZLE DIAMETER0.4 mm
SPEED30 mm/s
03Printers & downloads

Tested and documented

Tested on
  • 01Prusa MK4 (test specimens according to data sheet)
  • 02Bambu Lab A1 / P1S / X1C
Downloads
DocumentVersionLanguage
Technical data sheetDE v10/2024 · EN v12/2024DE · EN
Safety data sheetv01DE · EN
Slicer profilesOn requestENQUIRE
04More

Similar materials

Further materials from our range that suit similar applications.