FIBERTHREE
F3 PC CF 150 filament spool, side view
01 / 04Side view
PC blend 15 % Carbonfaser Ø 1.75 mm

F3 PC CF 150

Carbon-fibre-reinforced polycarbonate with a glass transition temperature of 145 °C, heat-resistant up to 130 °C and with low water absorption. For high-strength lightweight parts exposed to heat.

COLOUR · BLACK
  • 01Polycarbonate, modified
  • 0215 wt% carbon fibre
  • 03Good impact strength, low water absorption
  • 04Low warping
  • 05Excellent adhesion to the print bed
  • 06Heat-resistant up to 130 °C, matt black surface
01Properties

Measured on the printed part

Values according to the technical data sheet, measured on printed test specimens, just as you will use the material. “–” means: not stated in the data sheet.
PropertyTest directionUnitValue
MECHANICAL
Density–g/cm³1.25
Tensile modulusx-y 0°MPa7,545
Tensile strengthx-y 0°MPa69
THERMAL
Glass transition temperature–°C145
Heat deflection temperature (HDT A, 1.8 MPa)–°C130
ELECTRICAL & OTHER
Water absorption (24 h)–%0.3
Volume resistivity–Ω·m> 10⁹
Compared with F3 PA-CF Pro POLYCARBONATE INSTEAD OF POLYAMIDE · PER DATA SHEET
GLASS TRANSITION TEMPERATURE · °C
PC CF 150
145 °C
PA-CF PRO
68 °C
HEAT DEFLECTION TEMPERATURE HDT A · °C
PC CF 150
130 °C
PA-CF PRO
120 °C
Much higher glass transition temperature than F3 PA-CF Pro. It requires a heated bed above 140 °C and a heated build chamber.
02Material & processing

Dimensionally stable under heat

Material properties

Technical polycarbonate filament, modified for 3D printing, with 15 wt% carbon fibre. Good impact strength, low water absorption and low warping, excellent adhesion to the print bed.

With a glass transition temperature of 145 °C and a heat deflection temperature of 130 °C, it is suitable for high-strength lightweight parts with increased heat resistance. Matt black surface.

Processing notes
  1. 01Always use a wear-resistant nozzle.
  2. 02Print bed above 140 °C, heated build chamber above 80 °C.
  3. 03Store and print the filament dry.
Print parameters
NOZZLE310–330 °C
PRINT BEDabove 140 °C
BUILD CHAMBERabove 80 °C
MINIMUM NOZZLE DIAMETER0.6 mm
03Printers & downloads

Tested and documented

Tested on
  • 01Intamsys F410 (test specimens according to data sheet)
  • 02Prusa HT90
Downloads
DocumentVersionLanguage
Technical data sheetDE v8/2024 · EN v12/2024DE · EN
Safety data sheetv01DE · EN
Slicer profilesOn requestENQUIRE
04More

Similar materials

Further materials from our range that suit similar applications.